Guitar Necks, Heels, and Fingerboards

All Fingerboards are sanded flat to 1/4" (6mm).

We can cut fret slots on request for an 18.00 charge.  Please enter the scale length that you would like, slots will be a .020" kerf.

All sizes are approximate
Neck Size:
1" x 3" x 24" or 30"

Fingerboard Size: 3/8" x 3" x 20"

Neck thru, one piece Tasmanian Blackwood

1 only ! Tasmanan Blackwood neck thru body for electric guitar
15/16" x 3" x 46 5/8"  good vertical grain Tasmanian blackwood has more mass than mahogany, generally adding to the sustaining power of the neck! this wood works well with planes and chisels.

Ebony Finger boards Classical width

These are just a bit wider than a steel string fingerboard, for that extra classical neck width, allowing you to still get a true edge to work with.  Apporx. 2 3/4"  width by 21"  long  9 mm thick

Honduras Select SA Mahogany Neck - Guitar

Please select your desired length

Walnut Neck - Guitar

Please select your desired length
24" for Acoustic Guitars
30" for Electric Guitars

Maple, Hard Rock Neck - Guitar

Please select your desired length
24" for Acoustic Guitars
30" for Electric Guitars

Spanish Cedar 1 piece Neck - Guitar

1" x 3" x 24"  vertical cut  for necks  on classical and Flamenco guitars

3" x 4" x 6" Mahogany 1 Piece Toe-Heel Block - Guitar

For spanish heels

3" x 4" x 6" Maple 1 Piece Heel-Toe Block - Guitar

For spanish heels

3" x 4" x 6" Walnut 1 Piece Heel-Toe Block - Guitar

For spanish heels

3" x 3" x 4" Mahogany 1 Piece Heel-Toe block - Guitar

For dove tail joins

3" x 4" x 6" Spanish Cedar Heel-Toe Block - Guitar

Block 3" x 4" x 6"

3/4" x 3" x 5" Mahogany End/Butt Block - Guitar

3/8" x 3" x 5" End/Butt Block - Guitar

Available in mahogany or walnut

Bocote Fingerboard

East Indian Rosewood Fingerboard - Guitar

4A Ebony Fingerboard steel

Our Highest Quality Ebony, State if you are building a Steel string guitar.  2 1/4" tapering to 2 5/8" x 21"  this is enough for a steel string guitar The ebony is from India. It is  Black Like a good Ceylon ebony once was.

Flame /curl Maple Fingerboard - Guitar

Hard Rock Maple with Medium Curl

Ebony Fingerboard - Bass Guitar

3/8" x 3" x 48"

Maple Fingerboard - Bass Guitar

3/8" x 3" x 48"

Padauk/Zircote/Padauk Neck

Padauk neck with Zircote  centre strip
3/4"x 4 3/8" x 30 3/8" Planed smooth

Birds Beak mahogany Curl figured neck blank LIMITED SUPPLY !

Very Limited offering  !
cuT to 1 1/4" ( 1 only )  1 3/8" ( 2 only )  to 1 1/2'' ( 1 only )   Rough  a 1 1/4" is needed to create a vintage style Martin Peghead Joint known as a Birds beak. Good instruction on this process can be found at The Guild of American Luthiers website www.luth.org Volume #102 of American Lutherie.