Bracewood and Kerfed Linings

Sold by the inch of width. 3/4" tall, 18" - 22 "  length.
Prices vary with the tightness of grain:
8 to 12 lines per inch - $3.25
12 to 16 lines per inch - $4.50
16 to 20 lines per inch - $5.75 not always in stock ... please select 
 

Sold by inch of width.  State the width you desire.  

Only 1/2" in height this bracing could be used for dulcimers.  Classical fan braces are available in 1/4" to 3/8"  heights.

Prices vary according to lines per inch: 8 to 12, 12 to 16, 16 to 20.

1/4" x 5/8" x 120" Total.  Enough to do the back and top of one guitar. Usually 4 pieces 32" long sometimes 6 pieces 24" long

Blanks come uncut, if you would like kerfs cut into your blank please select your desired cut.

1/4" x 5/8" x 120" Total.  Enough to do the back and top of one guitar. Usually 6 pieces 24" long . Sometimes 4 pieces of 32" length

Blanks come uncut, if you would like kerfs cut into your blank please select your desired cut.

A minimal version of our kerfed lining in Spanish Cedar.
THeh triangular shape minimizes weight and mass. It can only be kerfed. as the reverse kerf would be TOO fragile. !

1/4" x 1/4"

Blanks come uncut, if you would like kerfs cut into your blank please select your desired cut.

shorter sticks and  3/8" high rather than 5/8" like the guitar kerf.
 This still leavese room for binding when the thickness of top or back is included.  

Sitka Spruce.

Includes 3 back braces, 2 top cross braces and 5 fan braces